Xiamen Caimore Communication Technology Co.,Ltd 2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009) ----------------------------------------------------------------------------------------------------------------------------------------------------------- CM510-1XX-SMS CSD function’s user guaid ★★Config Tool Please connect with CM510-1XX-SMS with PC by serial port wire directly, then dual click the This’s “ConfigTool”. config tool iron OPEN ★★Config steps 1. Please choose english version of the config tool, then follow up Xiamen Caimore Communication Technology Co.,Ltd 2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009) ----------------------------------------------------------------------------------------------------------------------------------------------------------- the below steps. 1. Select the DTU module 3. Config serial port parameters 2. Select the work state to config Note: How to config the serial port paramenters? Follow me: (1) COM port：Select the relative COM port connected with PC. You can check it like this: Xiamen Caimore Communication Technology Co.,Ltd 2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009) ----------------------------------------------------------------------------------------------------------------------------------------------------------- “My PC”→right click→Management→Device Manager→Ports (COM& LPT) , then check the ports you want to open. (2) Then please set the other serial ports paramenters like following ( which are default value) Default value： 2. After setting the serial port paraments, please click “open” button, and then re-power on the DTU in order to enter into the configuration state. Xiamen Caimore Communication Technology Co.,Ltd 2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009) ----------------------------------------------------------------------------------------------------------------------------------------------------------- 3. After enter into the configuration state, please config the other parameters on the “ General parameters” area. Xiamen Caimore Communication Technology Co.,Ltd 2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009) ----------------------------------------------------------------------------------------------------------------------------------------------------------- 1. Same as the termainal device 2. Choose CSD work pattern 3. Type the local SMS center No. & specify phone No. Enter state into the config 4. If the transfer contents are words, please select “是”, If it is hexadecimal data , please select “否” 6. Enter into communication state 5、Save 4. After above operation, CSD function will be config successfully. DTU will enter into the communication state. If ONLINE light be kept turn on, the Xiamen Caimore Communication Technology Co.,Ltd 2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009) ----------------------------------------------------------------------------------------------------------------------------------------------------------- DTU has been under communication state and can transmission the data. CM510-1XX-SMS Part Configuration Parameter Description Parameters Basic Paramet er Description Serial Rate Serial Parity Bit Teminal Device’s Serial Data parament Bit er Serial Stop Bit Serial Flow Control TRNS SMSSER Work Pattern SMSCLI CSD Debug Level The baud rate of terminal device’s serial port when it is under communication state. The parity bit of terminal device’s serial port when it is under communication state. The data bit of terminal device’s serial port when it is under communication state. The stop bit of terminal device’s serial port when it is under communication state. The flow control of terminal device’s serial port when it is under communication state. Ordinary MODEM mode DTU will convert the specific format data from serial port to text message, and then send it out for the specified mobile phone numbers; once DTU get the SMS message from the specify phone number which set in the configuration tool (up to 5 mobile phone number), it will convert the text message to the specific format data and export to the terminal device. DTU will transparent convert the serial port data to text message, and then send it out for the specified mobile phone numbers (up to 5 mobile phone number); once DTU get the SMS message from the specify phone number which set in the configuration tool (up to 5 mobile phone